We now have accessory power converters for all of our Moviecams. These converters take the 24 volts from the camera body at the 24 volt service output and convert it to 12 volts. The 12 volts out from the converter is available at two 3-pin fisher connectors and one 11-pin fisher connector. There is also a 2-pin fisher 24 volt output on the box. All connectors are protected by a self resetting polyfuse for overload. Maximum total amperage draw must not exceed 3 amp. Please remember that only voltage is available at these connectors. Start/stop, shutter pulse or tach pulse do not exist at this box and therefore must be accessed at other connectors on the camera body if necessary